Factors affecting the heating capacity of biomass pellet burners

To Many friends may not know that the heating capacity of the biomass pellet burner mainly depends on the strength of the flame, the surface area of ​​the furnace tube and the total heat transfer coefficient. It doesn't matter if you don't know, I will introduce it to you today. \u0026emsp;\u0026emsp;First of all, you should know the strength of the flame. The stronger the flame, the higher the temperature of the furnace. The greater the temperature difference between the furnace and the oil flow, the greater the heat transfer. The strength of the flame can be controlled by the nozzle Method to adjust; \u0026emsp;\u0026emsp;The heating performance is also related to the surface area of ​​the furnace tube. The larger the area of ​​the furnace tube where the flame contacts the flue gas, the more heat transfer; \u0026emsp;\u0026emsp; In addition, the total heat transfer coefficient is also very important. The better the total heat transfer coefficient of the furnace tube, the more reasonable the furnace structure and the more heat transfer. \u0026emsp;\u0026emsp;In actual use, poor combustion of the flame and coking of the furnace tube will affect the heating capacity of the oil burner, so pay attention to control the burner to make it burn completely, and prevent local furnace tube temperature from being too high and coking . To What are the advantages of the burner To 1. The biomass pellet granulator has high combustion efficiency, boiling semi-gasification combustion and tangential swirling air distribution design; To 2. The state is stable, and the biomass granulator runs stably under low pressure; To 3. The equipment is pollution-free and has obvious environmental protection benefits. It uses renewable biomass energy as fuel to realize the sustainable use of energy; To 4. Biomass pellet granulator has simple operation, convenient maintenance, automatic feeding, and small operation workload; To 5. The equipment can save the investment cost of the enterprise, the operation cost is low, and the structure design is reasonable. To If you are interested in gas oil burners, please contact us for a quote!