What are the operating procedures of methanol burners?

To 　　 The operation process of the methanol burner has the following 5 points: 　　 1. Before starting the methanol burner, check to make sure that the connections of the methanol burner and various parts are firm, and there is no looseness in the operation process and no changes in position. 　　2. Ensure that there is no oil leakage from the fuel container to the methanol combustion engine oil circuit and pipe fittings; the power supply is normal. 3. Turn on the oil circuit switch, the operation process power switch, the burner enters the self-check state, the self-check is completed in about 30 seconds, the burner fan motor starts, and sparks are generated between the ignition electrodes. After about 13 seconds of pre-blowing, a period of time The kerosene pump motor starts, the solenoid valve of the fuel pump opens automatically, the oil mist sprayed from the injector is ignited by the electric spark to form a flame, the first stage of the fire burns normally, the ignition electrode is delayed for about 10 seconds and then the ignition stops, the second stage kerosene pump motor starts The oil pump solenoid valve opens automatically, the flame detector (electric eye) senses the flame brightness, the controller enters the locked state, and the methanol burner enters the normal working state. 　　4. After the methanol burner is used or needs to be shut down, cut off the power supply and close the oil valve. The methanol burner must be stopped every time before unloading the fuel to the fuel container. 120 minutes after unloading, make sure that the filter is not blocked and the oil path is unblocked. The methanol burner can be used again. To If you are interested in gas oil burners, please contact us for a quote!