What are the operating procedures of methanol burners?

To 　　 The operation process of the methanol burner has the following 5 points: 　　 1. Before starting the methanol burner, check to make sure that the connection of the methanol burner and its components is firm and the position has not changed. 　　2. Ensure that there is no oil leakage from the fuel container to the methanol combustion engine oil circuit and pipe fittings; the power supply is normal. 3. Turn on the oil circuit switch, the power switch of the operation process, the burner enters the self-checking state, and the operation process is about 30 seconds after the self-check is completed, the burner fan motor of the methanol burner starts, and electric sparks are generated between the ignition electrodes. After about 13 seconds of pre-blowing, the first stage fuel pump motor starts, the oil pump solenoid valve automatically opens, the oil mist sprayed from the injector is ignited by the electric spark to form a flame, the first stage fire burns normally, the ignition electrode delays about 10 seconds and then stops ignition , The second stage kerosene pump motor starts, the oil pump solenoid valve automatically opens, the flame detector (electric eye) senses the flame brightness, the controller enters the locked state, and the methanol burner enters the normal working state. 　　4. After the methanol burner is used or needs to be shut down, cut off the power supply and close the oil valve. 　　 5. The methanol burner must be stopped before unloading the fuel into the fuel container. After 120 minutes of unloading, ensure that the filter is not blocked and the oil path is unblocked before it can be used again. To If you are interested in gas oil burners, please contact us for a quote!