What is the safety ignition problem of the burner

To 　　 There have been too many gas explosions and all kinds of gas accidents that threaten personal safety issues recently. It is important for safety issues! According to the combustion characteristics of the gas in the furnace, its safety control requirements mainly include pre-blowing, automatic ignition of the fire problem, combustion status monitoring, protection of biomass pellet burners not ignition, protection of flameout, and gas pressure. Limit protection, insufficient air pressure protection, power-off protection, measures to prevent gas leakage accidents, etc. Methanol Burner Let's discuss the safety ignition of the burner together: 　　 Methanol burners Gas burners should use electric spark ignition to facilitate automatic control. The combustion state must be dynamically monitored. Once the flame detector senses the flameout signal, it must be fed back to the burner in a very short time, and the burner will enter the protection state and cut off the gas supply. 　　 The flame detector must be able to sense the flame signal normally, neither sensitive nor dull. It is generally required that the response time from flameout to flameout signal sent by the flame detector should not exceed 0.2 seconds. The safe point of the burner When the burner is ignited, gas is introduced and the gas ignites and burns. The ignition action is required to occur before the gas is introduced to facilitate ignition and combustion. 　　 If the ignition fails, the flame detector cannot detect the flame signal, and the burner enters the protection state. Methanol burner means: Generally, it is required that the burner judges the flame signal sensed by the flame detector within 2-3 seconds after the gas is turned on. If it is not on fire, it will enter the protection state, and if it is on fire, it will maintain combustion. 　　 If the alarm light turns on after starting the burner, you need to wait at least 20 seconds before pressing the reset button again to restart. To If you are interested in gas oil burners, please contact us for a quote!