Heat conduction oil boiler diesel burner produces steam

The electric heat conduction oil furnace light oil burner is a new type of environmentally friendly thermal energy conversion equipment, which uses electrical energy as kinetic energy. The heating element converts electrical energy into heat energy. Using organic heat carrier (heat transfer oil) as the heat transfer medium, the heat transfer oil is forced to circulate in the system through a high-temperature oil pump to heat it repeatedly to achieve the purpose of continuously obtaining the required heat. Heat demand equipment energy; it can meet the requirements of process temperature and high-precision temperature control. Industry application: Electric heating heat conduction oil boiler diesel burner is widely used in high temperature shaping, plate heating, rubber, drying, printing and dyeing, chemical industry, plywood production, waterproof coil production, asphalt heating, non-woven fabric hot rolling, FRP hot pressing, molds, Drying rooms, ovens and other thermal industries. Product features: It has a complete operation control and safety monitoring device, which can realize automatic control. It can obtain higher working temperature under lower working pressure. High thermal efficiency, up to 95%, temperature control accuracy up to ±1℃. Small size, flexible installation, should be installed near the thermal equipment. Technical features: 1. Low operating pressure: The liquid phase can transfer heat energy to obtain a higher operating temperature at a lower operating pressure. The heat carrier is 70 to 80 times lower than the saturated steam pressure of water. 2. High heating temperature: The heating temperature of the thermal oil heating furnace can reach 280℃; the heating temperature is automatically controlled, high sensitivity and stable heating. 3. Safe and reliable: Su Yi specializes in the research and development of light oil burners for heat transfer oil furnaces. It has complete operation control and safety monitoring devices, easy to operate, safe and reliable. 4. Environmental protection design: heat conduction oil furnace light oil burner equipment is equipped with a new electric heating system, electricity replaces coal, saving investment, environmental pollution, at the same time, heat conduction oil furnace light oil burner heating fast, high thermal efficiency, more economical efficiency! The purpose of using biomass heat-conducting oil boiler diesel burner is to generate steam for heating, but when steam boiler diesel burner generates steam, it should not be equipment or more attention, because at this time steam boiler diesel combustion opportunities begin to increase At the same time, the saturation temperature of the boiler water also began to increase. As the water temperature in the steam boiler diesel burner continues to rise, the temperature of the bubbles and the metal wall of the evaporative heating surface also begin to rise at any time. It is necessary to pay attention to the temperature of thermal expansion and thermal stress. Due to the thickness of the foam wall, the main problem in the heating process of the boiler diesel burner is thermal stress. At the same time, the problem of overall thermal expansion must be considered, especially for the surface of the heating tube of the steam boiler diesel burner. Because of the thick wall and long length, the problem during the heating process is the overall thermal expansion, and attention must be paid to thermal stress to prevent negligence. s failure. By adjusting and controlling the pressure, temperature, water level and other process parameters within the normal allowable range, the reliability and safety of various instruments, valves and other components can also be evaluated, so as to fully ensure their safe and stable operation. Steam boiler diesel burner. The higher the pressure of the steam boiler diesel burner, the higher the energy consumption, and the corresponding steam equipment, pipes and valves will also be subject to increased pressure, which will relatively increase the protection and maintenance requirements of the steam boiler diesel burner and generate steam. The heat dissipation and loss rate during production and transportation will increase. The salt contained in the high-pressure steam increases with the increase in air pressure. These salts can cause structural phenomena in heated areas, such as water wall pipes, smoke pipes and POTS and pans, leading to superheated water bubbles, blockages and other phenomena. In severe cases, it may cause dangerous accidents such as pipeline explosion. Compared with the steam boiler diesel burner, the heat transfer oil furnace has the characteristics of low working temperature, low working pressure, low pressure, high temperature technology, stability under various loads, and high thermal efficiency. The utility model has complete operation control and safety monitoring devices, and the heat-conducting oil boiler diesel burner burns wood, which is convenient to operate, safe and reliable. Closed loop, heat transfer oil boiler diesel combustion electromechanical heating, liquid heat transfer, low heat loss, good energy saving effect, and low operating cost. Fast assembly or assembly, convenient transportation, short installation cycle, fast operation, compact structure, and can be installed separately. Good performance, using high-efficiency insulating materials and advanced construction technology. The heat loss of the furnace wall is small, and the temperature adjustment can meet different requirements. Ordinary boiler diesel burners have two disadvantages. First, smoke is produced during the combustion process, which is an important source of pollution. Secondly, incomplete combustion of ash and serious energy waste. Compared with traditional industrial boiler diesel burners, the new technology of pure smokeless energy-saving cyclone boiler diesel burners has great advantages. Compared with the manual boiler diesel burner, it saves 30% to 35% coal and 25% coal. Compared with the chain-type automatic boiler diesel burner. Due to the pure smokeless energy-saving technology, PID inverter and anti-ballistic missile energy-saving system, compared with the traditional boiler diesel burner, the energy saving is 40%, and the volatile combustion is more than 90%. The combustion rate of the diesel burner is only 78%. 22% of the flue gas is discharged into the atmosphere, and the pure smokeless energy-saving technology makes the roll slag speed reach 97%. The coal slag combustion rate of the unified boiler diesel burner is only about 80%. For these reasons, pure smokeless energy-saving technology can increase the furnace temperature from 1200 degrees Celsius to 1500 degrees Celsius, thereby achieving energy saving. ! If you are interested in diesel combustion engines, please contact us for a quote!