What are the aspects of the pre-combustion inspection of the burner?

Check whether the diesel is in place, whether the fuel pipeline is clean and unobstructed, and whether the valve is open. Whether there is pipeline leakage and whether the pipeline installation is reasonable. Whether the oil inlet and return lines are installed correctly, the return pipe is not allowed to install valves, the internal inspection of the burner, whether the fuel nozzle of the burner is installed and whether the ignition electrode is adjusted.　　 Is the direction of motor rotation correct? Whether the external circuit connection meets the requirements. It is a more complicated technical problem to select the combustor according to the circuit conditions. The user can select the combustor according to the following conditions: fuel type.　　 First, the user must determine what fuel he uses, and choose a burner according to the fuel he chooses. For example, if the fuel is diesel, use an oil burner; if the fuel is gas, use a gas burner.　　 For the requirements of the degree of automation, users should choose nozzles (burners) or fully automatic burners according to their own economic capacity and equipment requirements after choosing fuels. Generally speaking, the cost of using nozzles (burners) is relatively low, but the safety issues are difficult to guarantee; the cost of using fully automatic burners is higher, but you do not need to configure your own fans and control systems, easy to operate, high furnace temperature control accuracy, and safety Guaranteed. To If you are interested in gas oil burners, please contact us for a quote!