What are the vulnerable parts among all the accessories of the biomass burner?

To Among all the accessories of the biomass burner, what are the vulnerable parts? To 1. Gas pressure regulator: When the burner stops at low temperature, oil or water enters the pressure regulator and freezes or sticks. To 2. Gas pressure gauge: especially the micro pressure gauge on the outlet side of the regulator, because the regulator is damaged and loses its pressure regulation function, the pressure gauge collapses due to overpressure. To 3. Filter cotton for gas filter: It should be replaced regularly. To 4. Gas pressure regulator: due to damage to the regulator, it loses its pressure regulation function, and the gas pressure exceeds the normal working range, and the built-in diaphragm of the pressure regulator is broken. To 5. Gas valve group: Due to too much impurities in the gas, the gas filter was not cleaned and replaced in time. Impurities accumulate in the valve port of the gas valve block, affecting the normal closing of the gas valve port. The flame cannot be extinguished normally, causing danger. To 6. Program controller: power fluctuation, current impact, burnout or program self-locking. To 7. Blower motor: power supply fluctuations, current impact, may burn the motor. To 8. Ignition transformer: The burner of the burner accessory frequently starts and stops, which may burn the ignition transformer. To 9. Ion probe: burning in the flame for a long time, it is easy to deposit carbon and aging. It should be wiped or replaced regularly. To 10. Throttle servo motor: Generally, except for the adjustment of the cam position of the throttle servo motor when the burner starts to be installed and used, the burner user and user technicians should not adjust it by themselves. The consequences of the adjustment may complicate troubleshooting, or simply damage the damper servo motor. To 11. Oil pump: long-term operation, the gear gap will wear out and the oil pressure will drop. To 12. Fuel injector: After long-term use, the oil outlet diameter will become larger, which will affect the atomization. To If you are interested in gas oil burners, please contact us for a quote!