Reasonably organize the airflow distribution of the air supply and exhaust system of the burner spray room

To Reasonably use the air supply of the burner: In order to reasonably organize the airflow distribution of the air supply and exhaust system of the burner spray room to meet the requirements of the spray operating environment, it is an indispensable device in the production of large-scale coating equipment, wiping rooms, drying rooms and spray booths . In the past, in order to keep the paint spray booth clean, the air supply system was sent to the fresh air conditioned by the air conditioning system, and the exhaust gas was discharged through the exhaust system. This requires a lot of energy consumption, adjusting the temperature and humidity of the fresh air to meet the air supply requirements. In recent years, the new spray booth has been greatly improved in terms of energy saving. The interior of the spray booth can be pided into two areas: manual operation area and unmanned operation area. In the manual operation area of ​​the burner, all new spray booths are equipped with fresh air regulated by the air conditioning unit, while in the unmanned operation area, most spray booths are equipped with disposable circulating air and a small portion of fresh air. Reduce the fresh air in the air conditioning unit. Large inhalation volume saves energy consumption. For example, the air discharged from the wiping chamber is sent to the spraying area of ​​an automatic coating machine or an automatic spraying robot through a circulating filter device. Part of the air discharged from the inspection area of ​​the spray booth or part of the air discharged from the cool and dry area passes through the circulating filter device. Send it to a cool and dry place, and then send it outside the factory. By rationally using circulating air, the quality of the incoming air can be ensured and the amount of fresh air taken in can be reduced. In addition, the main body of the side sprayer on both sides of the automatic sprayer of the new pretreatment equipment is moved to the outside of the paint sprayer, thereby reducing the width of the automatic spraying area of ​​the burner. The reduced volume of this area also reduces the amount of air supplied and reduces energy consumption. Nowadays, modern and excellent paint spraying workshops at home and abroad adopt automatic spraying machines and paint booths of this structure during the automatic spraying operation. To If you are interested in gas oil burners, please contact us for a quote!