Methanol burner structure and precautions before starting operation

To 　　 Methanol burner structure: 　　 1. The methanol burner adopts a boiler split structure, and the heated part and fuel part of the boiler can be separated freely. The burner structure is convenient for operation and maintenance and replacement of the stove. Methanol combustion greatly reduces labor intensity and improves work efficiency. 2. The methanol burner adopts a double drum heating structure. The heated part of the boiler is pided into a preheating chamber and a combustion chamber. The preheating chamber is an auxiliary heating zone. The structure of the methanol burner and the operating chamber are equipped with a three-pass pyrotechnic tube, and the cold water flows from this chamber. After entering the pyrotechnic tube, the heat is changed to warm water and then enters the combustion chamber; the combustion chamber is mainly heated to the outlet water temperature. After the cold water enters the boiler, it is preheated-heated-sent out of the boiler, which reduces the exhaust heat temperature and improves the utilization of the boiler's thermal efficiency. 　　3, imitation large stove type combustion technology 　　4. Microcomputer automatic control system. 　　 Note before operating: 　　 1. Be thoroughly familiar with safe operation knowledge. 　　 2. The burner must carefully check the tightness and installation reliability of all pipelines. 3. Precautions before starting the machine. Pay attention to the operation of the methanol burner before starting the machine. For the newly installed methanol burner, carefully check whether the alcohol oil meets the requirements of the burner before debugging; check whether the detection instrument on the methanol supply pipeline of the methanol burner It is normal and whether the opening and closing of the pipeline valve is normal, and whether it is convenient for future use and maintenance. To If you are interested in gas oil burners, please contact us for a quote!