Application of biomass pellet burner in sewage work

To Application of Biomass Pellet Burner in Sewage Discharge Work To When the biomass pellet burner performs pollutant discharge work, it is required to carry out after compression or when the load is low. The same problem will occur when the biomass burner has insufficient intake air volume or blast air volume. At this time, it is necessary to increase the amount of induced air, and increase the amount of blast air in the furnace and under the grate to reduce the occurrence of combustible gas. The configuration problem of the equipment, the power configuration is suitable for oneself. Some factories are not honest, small equipment is sold as big equipment. If you don’t pay attention, insufficient heat will cause product quality problems and major problems that cannot be produced. At this time, the water circulation in the equipment is relatively slow, and the dirt in the pipeline is also easy to accumulate, so that the sewage discharge effect will be better, and it will not Affect the biomass burner. Moreover, the biological sewage discharge work needs to be carried out frequently and uniformly. There can be multiple sewage pipes at the same time, and each sewage pipe must be discharged in turn. To If only one part of the sewage pipe is discharged, and the other part is not discharged, the water circulation will be damaged due to blockage. When the biomass burner is performing sewage discharge, it is required to be carried out after compression or when the load is low, because the water circulation in the equipment is relatively slow at this time, and the dirt in the pipeline is also easy to accumulate, so that the sewage discharge effect will be better. At the same time, it will not affect the biomass burner. To If you are interested in gas oil burners, please contact us for a quote!