Installation and operation of the burner of the stenter setting machine

In the daily use of the drawing machine settings, the user does not only Pay attention to reasonable and standard operations, and also consider safety issues. The so-called safety not only needs to protect the safety equipment of the stretch forming machine, but also ensure the safety of food. Therefore, in practice, how should we pay attention to safety issues?

First, a stowage molding machine equipment. Generally speaking, the equipment should be placed in a well-ventilated, non-corrosive gas environment. In addition, the storage equipment should ensure that it is flat and dry, so that the concrete root layer will not be less than 150 mm. Together, to ensure that the two sides of the needle plate are symmetrical and allow no errors.

Secondly, when the equipment is pulling the rod, it is important to ensure that the machine is free from impurities or other obstacles that hinder the normal operation of the chain. In the process of transporting the rollers, the guide rollers and rollers fall parallel to each roller required for alignment.

Thirdly, regarding the graphics of the machinery and equipment, it is important to pay attention to this moment in this case. Remember, no one is standing near the device. The repairer does not work. In addition, check the room to ensure that the temperature of the electronic control box should be within the specified range. If soot and other debris are in the electronic control box, it should be in place at that time.

In addition, in the confirmed temperature control program, the device's pulling force setting position should be checked in advance of the driving part of the device to ensure sensitive operation. The full width should be adjusted to the required width, and the marginal tracking and overfeed rate should be adjusted to the predetermined value.



What is the velvet that can be used for the burner of the velvet setting machine
How to open the burner of the stenter setting machine! If you are interested in low-temperature textile burners, please ask us for prices!