Precautions for the operation of heat-conducting oil boiler diesel burner

The heat transfer oil boiler diesel burner system has high heat utilization rate, convenient operation and maintenance, and closed loop heating and atmosphere Connected, can extend the service life of the boiler diesel combustion engine, liquid or gas phase transmission and heating. The heat-conducting oil boiler diesel burner adopts a three-circuit coil design, and the system is equipped with an expansion tank to realize low-pressure and high-temperature heating. The coil structure is adopted, the heating surface is sufficient, and the expansion is completely absorbed. Imported low-NOX burner, full combustion, is an environmentally friendly product. Boiler diesel burner can choose advanced touch screen computer controller and digital computer controller for automatic control. With automatic temperature adjustment, automatic ignition, differential pressure, over temperature, flameout protection. Boiler diesel burner manufacturing specifications are strictly implemented in accordance with national manufacturing standards. 1. According to the provisions of labor protection products, such as oil-proof protective gloves, thermal radiation protection eyes. 2. Avoid long-term inhalation of thermal oil and gas. In poorly ventilated environments such as containers, ventilation equipment must be provided. 3. If the skin is in direct contact with the thermal oil, please wash it with soap and then rinse with water. If there is thermal oil splashed on your clothes, please quickly remove it and thoroughly clean the splashed thermal oil on your skin. 4. When refilling or extracting heat transfer oil, the operation site should be well ventilated and open flames are strictly prohibited. Operators should pay attention to prevent the hot heat transfer oil from splashing on the body and causing burns. If you encounter an emergency, you should calm down and take appropriate measures. If you are scalded by high-temperature heat-conducting oil, immediately rinse the burned area with a lot of cold water or ice for local physical cooling, and promptly send to the hospital for treatment; when a large amount of air mist absorbs heat-conducting oil by mistake, the patient should quickly move to a well-ventilated environment. If the patient has physical discomfort, trance, etc., he should inhale oxygen for emergency treatment, and the patient should be sent to the hospital for treatment immediately. If the heat-conducting oil splashes into the eyes, immediately rinse the eyes with running water until the irritation disappears or the feeling is not serious, and medical personnel should be invited for treatment. If you accidentally eat or heat conduction oil, you should dilute a large amount of water immediately, or take measures to induce vomiting, spit out heat conduction oil, and go to the hospital for treatment. Feature product function 1. The thermal oil boiler diesel burner is a direct-flow special boiler diesel burner developed based on the design concept of forced circulation. 2 Closed cycle heating, connected to the atmosphere, can prolong the service life of the boiler diesel burner, liquid phase heat transfer, low heat loss, significant energy saving effect, and good environmental protection effect. 3 The heat-conducting oil boiler diesel burner adopts a three-circuit coil design and a direct-flow structure, which determines the safety that the traditional boiler diesel burner does not have. 4 Due to the coil structure, the heating surface is enough to make it have higher thermal efficiency. 5 Heat transfer oil boiler diesel burner, the remarkable feature is countercurrent heat transfer, the temperature difference between the combustion smoke temperature and the heat transfer oil outlet temperature is less than 30℃. 6 The heat-conducting oil boiler diesel combustion engine has excellent structure, mainly runs under low pressure, and the working temperature is lower than 450 ℃, with the characteristics of low pressure and high temperature. Functional characteristics 1, with the characteristics of low pressure, high temperature, safety, high efficiency and energy saving. 2. It has a complete operation control and safety monitoring device, which can accurately control the working temperature. 3. Reasonable structure, complete supporting facilities, short installation period, convenient operation and maintenance, and convenient layout of boiler diesel burner. 4. Because the organic heat carrier furnace adopts advanced explosion-proof electric heating structure, it can be applied to factory II explosion-proof, and the explosion-proof grade can reach C level. Other characteristics Compared with the traditional heat transfer medium water and steam, heat transfer oil has the following characteristics: 1. A very high working temperature can be obtained under an almost constant pressure. In other words, it can greatly reduce the working pressure and safety requirements of the high-temperature heating system, and improve the reliability of the system and equipment. 2. It can meet the process requirements of heating and cooling at different temperatures in a wide temperature range, or realize the process requirements of high temperature heating and low temperature cooling of the same heat transfer oil in the same system. It can reduce the complexity of the system and operation. 3. Omit the water treatment system and equipment to improve the thermal efficiency of the system and reduce the maintenance workload of equipment and pipelines. It can reduce the initial investment and operating costs of the heating system. 4. In the case of system leakage caused by an accident, the heat transfer oil may burn when it encounters an open flame. This is a problem that the heat transfer oil system has compared with the steam system. However, in the absence of leakage, the operating safety of the heat transfer oil system is higher than that of the water and steam system because it works at low pressure. 5. Compared with the molten salt of another high-temperature heat transfer medium, when the working temperature is above 400℃, the molten salt has an absolute advantage over the heat transfer oil in terms of the price and service life of the heat transfer medium, but in other aspects There are obvious shortcomings. Especially the complexity of system operation. 6. Advanced technological process, organic heat carrier boiler diesel burner is a new type of special heating boiler diesel burner, with the characteristics of high temperature and low pressure, working pressure is 0.1 Mpa, even if it is atmospheric heating temperature, liquid 340℃ or 400℃ In the gas phase, the overall structure has a certain degree of flexibility, and considering the free expansion operation of the heating components, the tubular heating surface of the elbow plate, in order to operate more safely and efficiently, an air preheater is added to enhance the combustion degree in the furnace. Speed ​​will increase in various industries to improve efficiency, environmental protection, and energy-saving services. ! If you are interested in diesel combustion engines, please contact us for a quote!