What are the main advantages of the burner of the stenter setting machine?

Everyone should know that in the process of textile printing and dyeing, it will be different under the influence of different factors. The degree of elongation or contraction. Therefore, it is necessary to carry out post-processing to achieve better use effect and appearance quality. Under normal circumstances, we will use the stenter setting machine burner to finish the fabric in the later stage. The reason why it is necessary to use this equipment for later repair work is mainly to use its function to eliminate the internal stress of the fabric and keep the arrangement of the warp and weft in the fabric in harmony. In other words, after being processed by the burner of the stenter setting machine, the surface of the fabric will be smooth and stable. However, when operating the equipment, in order to ensure its processing effect, we need to control some items. Analyzing from the current situation, although the domestically made stenter setting machine burner equipment has a certain improvement in technology, for example, it has realized synchronous control. But when controlling, basically use the synchronous control system that combines the man-machine interface and the PLC system. This kind of system has many shortcomings, not only the cost is high, but the whole circuit design is more complicated, and its control algorithm is completed by PLC. Due to the difference between the signal acquisition operation and the PLC's own running cycle, there is a certain time delay. So, what are the main control items included in the operation of the burner of the stenter setting machine? The first is the temperature control of each oven. At present, different manufacturers have relatively mature control schemes when carrying out this aspect of control work. The second is the synchronous control of the main machine and the upper overfeed, the lower overfeed, and the left and right brushes; the third point is the synchronous control of the main machine and the cloth out. In addition to the above control items, there are also three equally important control items. They are: the synchronous control of the mainframe of the stenter setting machine and the drying of the rolling mill; the adjustment and control of the fabric tentering width and the adjustment and control of the weft skew. If you are interested in low temperature burners, please contact us for a quote!