Common faults and treatment methods of burners

To 　　: 　　 In the event of a failure, you must first check whether the conditions for normal operation of the burner are met: 　　 1. Is the power supply normal? 　　 2. Is the fuel supply system normal? For example, whether the gas pressure on the gas supply pipeline is normal and whether the ball valve is open (gas engine) whether there is oil in the fuel tank and whether the valve on the oil supply and return pipeline is open (oil engine) 　　 3. Water flow switch, water level switch, oil level switch, common gas pressure switch of burner, etc. 4. Faults and treatment methods Has the air volume, gas volume or fuel volume been changed during combustion? 　　 If it is determined that the failure is not caused by the above reasons, the relevant functions of the burner must be checked and tested. The general method is to remove some interlocking controls, turn on the burner, and then accurately observe the following working process. According to the phenomenon, the problem can be quickly found and eliminated. To If you are interested in gas oil burners, please contact us for a quote!