How do the parts of the burner work

To 　　 Burner accessories are an important part of the burner, let’s take a look at the working process of the burner of the burner accessories. 　　 1. Boiler level, temperature or pressure check. 　　 2. Gas pressure, wind pressure, residual fire inspection. When the fuel is diesel, check the fuel tank storage capacity. Whether the oil pipe and oil pump have been filled with oil. 　　3. Leak detection stage of the gas valve group: Check whether the gas valve is airtight. 　　4. Purge stage before pre-blast: Fully open the damper, purge the furnace, eliminate residual gas in the furnace, and supply oxygen to the hall to facilitate the ignition process. 　　 5. Wind pressure detection: to ensure the normal operation of the blower. 　　6. ​​Ignition stage: the air door of the burner accessory is closed to the ignition position, and the ignition transformer of the burner accessory and the ignition valve of how it works are opened to implement automatic ignition. 　　 7. Confirm that the ignition flame is established. 　　 8. Open the damper to the main fire position and open the main gas valve to establish the main flame. 　　 9. Close the ignition valve and confirm that the main flame is established. Implementation of large and small fire conversion or proportional adjustment of flame size. 　　 During the whole work process, monitor the boiler liquid level, temperature or pressure, gas pressure, wind pressure, flame, abnormally close the burner and gas valve and alarm. To If you are interested in gas oil burners, please contact us for a quote!