Are there any questions on the burner of the setting machine and what are the forms of waste heat recovery?

For the machine and equipment of the sizing machine burner, in terms of specific types, related to the website products and keywords, it is There are two burners for stenter setting machine and velvet setting machine burner. However, these two are also in the large range of the setting machine burner, so below, we may learn and in-depth from the setting machine burner as a whole, so as to help the specific product. Specific understanding. 1. How to understand the burner of the setting machine? In which industries are its applications mainly? These two questions are not difficult to answer from Changzhou Wujin Zhengda, the manufacturer of the setting machine burner. Therefore, the specific answers they give are: A simple understanding of the setting machine burner is: the setting machine combustion It can be considered as a kind of machinery and equipment for heating and shaping the grey cloth, so that the cloth can be flattened and shaped with a good surface effect. Therefore, through this understanding, we can know that it is used more in the textile and printing and dyeing industries. 2. Is the heat transfer medium of the burner of the setting machine single? And, what is its hourly power consumption related to? The heat transfer medium for the burner of the setting machine, Changzhou Wujin Zhengda, the burner manufacturer of the setting machine, believes that it is not a single one. There are two options, one is heat transfer oil, and the other is steam. As for which one should be selected, it depends on the actual situation and it is up to it to decide. As for the hourly power consumption of the machinery and equipment, it depends on the specific type of burner of the setting machine and its power, which are mainly related to these two. 3. On the burner of the sizing machine, if it is necessary to recover the waste heat of exhaust gas, then, what are the specific forms? And, how is the arc of the burner of the setting machine adjusted? Since these two questions are about the burner of the setting machine, the following, the manufacturer of the setting machine burner, Changzhou Wujin Zhengda, will give the correct answer, so as not to have misconceptions. For the recovery of waste heat from the exhaust gas on the burner of the setting machine, there are three types of aluminum fin superconducting tubes: split type, centralized type, and combined type, and everyone can choose. If you want to adjust the arc of the burner of the sizing machine, it is usually done and realized by rotating the knob on the machine. Analysis, discussion and solution of problems such as the inclined position of the burner of the stenter setting machine
Why use the burner of the stenter setting machine and how to feed the cloth? ! If you are interested in low-temperature textile burners, please ask us for prices!