Quotation from manufacturers of stenter setting machine burners

Friends who have used the burner of a stenter setting machine should know that during the operation of this equipment, the main technological processes are ：Rolling car, upper overfeeding, lower overfeeding, main chain, brush, cloth discharge and cloth drop, etc. In fact, to distinguish it simply, the main process of the burner of the stenter setting machine can be pided into two processes: stenter and setting. Let's understand the specific content together. First of all, we need to briefly introduce the main process of the burner of the stenter setting machine. The so-called tentering process, in fact, mainly refers to the application of a certain tension to the weft of the fabric, which can remove the uneven edges, weft skew and width of the fabric under the force of the pretreatment and dyeing process. And so on shortcomings. In other words, after this process, the surface quality of the fabric will be significantly improved. The second is the setting process. Specifically, it is to first set a suitable tension for the burner of the stenter setting machine, and then process the fabric. The textile burner first heats it to a certain temperature and then keeps it for a certain time. In this way, the fiber molecular chain will be readjusted in the new position. Then cool down at an appropriate speed to fix the fabric's heat-changing state. In general, after the setting treatment of the burner of the tenter setting machine, the wrinkles contained on the fabric can be removed, and at the same time, new wrinkles can be prevented from appearing again. In other words, after treatment, the surface quality of the fabric can be significantly improved to make it look more beautiful. The above is the main function of the stenter process and setting process in the process of operating the burner of the stenter setting machine. I believe that after learning these contents, everyone can have a deeper understanding of the burner of the stenter setting machine. If you are interested in low temperature burners, please contact us for a quote!