Vertical gas fuel oil heat conduction oil furnace made in China Boiler burner

The gas heat conduction oil furnace produced by the company uses a circulating oil pump to force a liquid phase cycle to transfer the heat energy to the heating equipment. Then it returns to the reheated DC special industrial furnace. It is widely used in petrochemical, textile, printing and dyeing, plastics, rubber, Food processing, wood processing, asphalt heating, carton production, vegetable dehydration, baking varnish, casting sand mold drying, etc. It can also be used for baking, steaming, shaping, melting, and drying at 350oC.
2 Introduction of gas heat conduction oil furnace:
The gas heat conduction oil furnace is an assembled forced circulation vertical fuel (gas) boiler burner. The heating surface of the burner body of this series of boiler has a compact structure. The heating surface is composed of inner and outer disks densely arranged. The inner coil is a radiant heating surface, and the outer surface of the outer coil and the inner coil constitute a convective heating surface. The boiler burner consists of an upper body and a lower combustion chamber, which are combined on site. After the combustion is fully burned in the combustion chamber, most of the heat is absorbed by the radiant heating surface, and the high-temperature flue gas enters the convection heating surface for heat exchange. After exiting the boiler burner, it heats the air required for the boiler burner combustion in the air preheater. The flue gas is sent to the chimney and discharged into the atmosphere by the induced draft fan through the dust collector.
3 Product features of gas heat conduction oil furnace:
u0026middot; Easy installation, as long as the upper body and the lower combustion chamber are closed, the installation period is short.
u0026middot; The heating surface adopts close-packed round coil tubes, and the heating surface is arranged adequately, which reduces the heat load on the surface of the tube and makes the use of heat transfer oil safer.
u0026middot; The medium flow is reasonable, the heat conduction oil field is low (inlet) to (outlet), and the gas produced during operation improves the thermal efficiency of the boiler burner.
u0026middot; The fuel burns adiabaticly in the combustion chamber, which can make it easier to burn and burn more fully and improve the thermal efficiency of the road.
u0026middot; The furnace top of the boiler burner is arranged with close-packed coils, which can better protect the furnace roof and avoid the phenomenon of furnace roof burning. ! If you need boiler burners, please inquire us!