Technical factors affecting the burner of the stenter setting machine

The process of the burner of the stenter setting machine should be judged based on three factors , Respectively, are temperature, time and tension. 1. Temperature When the fabric is heat-set by the burner of the stenter setting machine, the temperature control will determine the quality of its qualitative quality. This is because after heat setting, the degree to which wrinkles on the original surface of the fabric are eliminated, the improvement of surface smoothness, the dimensional thermal stability of the fabric and other wearing properties are closely related to the level of heat setting temperature. 2. Time Before the finalization, it must reach a certain temperature before it can be carried out. Heating is required. Therefore, the setting time is another important process condition for the heat setting of the burner of the stenter setting machine. After the fabric enters the heating zone, the time required for heating and setting can be roughly pided into the following parts: heating time, heat penetration time, molecular adjustment time and cooling time. Under normal circumstances, the control of the heat setting process quality of the burner of the stenter setting machine mainly refers to the control of heating time, heat penetration time and molecular adjustment time, excluding cooling time. 3. Tension Because the tension on the surface of the fabric will change under certain conditions, it will cause the dimensional thermal stability, strength and breaking elongation of the fabric to be affected to a certain extent. Therefore, by controlling the three factors of temperature, time and tension, the quality of the process can be basically guaranteed when the stenter setting machine burner is used for the setting process. The process flow of the exhaust gas treatment program for the burner of the stenter setting machine
What are the types and standards of the burner of the velvet setting machine and the available velvet! If you are interested in low-temperature textile burners, please ask us for prices!