Why the increase in fuel consumption of the burner?

When we use the burner for a long time, we will feel that the fuel consumption of the burner has increased. Why is this? There are three reasons for the increase in fuel consumption of the burner: 1. The efficiency of the machine is reduced. When using the burner, we often only use it after the first debugging, and we do not frequently repair and debug. This may cause the bottom wind to be too small, uneven bottom wind, and induced wind Too big, too big or too small secondary air, these reasons may cause the efficiency of the machine to decrease. If these are all ok, then you can also check whether the vent is blocked, and if so, you should go regularly. Cleaning up and clogging of the burner may also reduce the efficiency of the machine. Extremely reduced efficiency may increase the fuel consumption. 2. The fuel itself, the fuel problem you can consider from several aspects, such as the calorific value, density, moisture and packaging of the fuel you are using. If your fuel is non-pure wood chips, it will cause the particle combustion value to be too low and the density If it is not enough, it may be because the particles you are using contain sand, glue, and talc. These may increase the amount of burners, and lower fuel efficiency will increase fuel consumption. 3. The equipment operating conditions have changed, and the application equipment operating conditions have changed generally in three aspects. One is the change in temperature, the other is the decrease in equipment efficiency, and the third is the increase in production output. These are all possible to increase fuel consumption. s reason. Combustor follows the principle of energy saving and emission reduction to contribute to environmental protection. If the fuel of the combustion engine increases, firstly it will cause waste, and secondly, it will cause increase in product cost, which is a waste for the enterprise, but also Did not achieve the effect of energy saving. To If you are interested in gas oil burners, please contact us for a quote!