Standardized operation of biomass burners can effectively reduce the probability of accidents

To Assuming that the biomass burner is purchased from the manufacturer and is willing to comply with various standard operations during use, there will be no hidden dangers, and it will not cause any threat to the users and the environment near the biomass burner, which can be effective Reduce the probability of accidents, but for users, most of them do not understand the operations that need to be avoided, which provides opportunities for accidents. To One: lack of awareness of regular maintenance It is undeniable that the lack of awareness of regular maintenance of biomass burners is actually a common misunderstanding of most users. Generally speaking, in addition to furnace doors and vents that need to be cleaned, viewing vents, except for reef holes, etc. The cleaning work of other parts cannot be ignored, otherwise the long-term accumulation of ash and slag will inevitably affect the function and use of the product. To Two: Do ​​not burn in large quantities In order to improve production efficiency, users have also fed a large amount of material to the biomass burner. This approach is simply a model of error, because if a large amount of material is fed, it will be difficult for the equipment to burn the materials at the same time, or even fail to ignite normally. In addition, because the materials used did not enter the burning state in time, but only fell into a semi-combusted state, the equipment operating environment would be filled with combustible gas, and the threat to life is obvious. To To Before using the biomass burner, check the explosion-proof valve in advance to ensure the safe and normal operation of the equipment. 　　 1. Don't change the built-in parameters of the machine at will. Changing the equipment parameters at will may cause the burner to malfunction. 　　2. During the work, you should always use the fire port to carefully observe the combustion of biomass pellet fuel in the furnace. 　　3. The ash discharge door of the burner should be cleaned frequently, and the biomass pellet fuel should be burnt out or cleaned up when not working to prevent the biomass burner from backfire. 　　 All in all, the above two operational errors are problems that must be avoided when using biomass burners. In addition, the furnace door must not be opened when the equipment is running. To If you are interested in gas oil burners, please contact us for a quote!