What to do if the burner suddenly fails?

To 1. The fuel itself can be considered from several aspects in terms of fuel, such as the calorific value, density, moisture and packaging of the fuel you use. If your fuel is non-pure wood chips, the combustion value of the particles will be too low and the density If it is not enough, it may be because the particles you are using contain sand, glue, and talc, which may increase the fuel consumption of the burner, and the reduction of fuel efficiency will increase the fuel consumption. 2. The efficiency of the machine is reduced. When people use the burner, they usually use it after debugging, and do not frequently repair and debug. This may cause the bottom wind to be too small, uneven bottom wind, and excessive induced wind If the secondary air is too large or the secondary air is too small, the efficiency of the machine may be reduced. If all these are ok, then you can check whether the vent is blocked. If so, clean it regularly. Clogging may also cause a decrease in machine efficiency, and a decrease in machine efficiency may result in an increase in fuel consumption. 3. Changes in equipment operating conditions and changes in application equipment operating conditions are generally manifested in three aspects, one is temperature changes, the other is the decrease in equipment efficiency, and the third is the increase in production output, which may lead to increased fuel consumption. To If you are interested in gas oil burners, please contact us for a quote!