Application of biomass burners in solid caustic soda cooking

To Application of biomass burner in solid caustic soda cooking To The main performance is: suitable for a variety of fuels: suitable for various negative pressure combustion heating furnaces: reliable fault protection: large output power range, which can meet the extreme load requirements; intelligent proportional adjustment of control point temperature (pressure); system power failure, automatic Cut off fuel supply; flue gas emission meets environmental protection requirements: normal combustion does not require fan supply, saving power: positive pressure purging, atmospheric ignition, negative pressure combustion; premixing of gas and air is realized, and the combustion efficiency of secondary air supply is extremely high ; Easy to install, debug and maintain. It was decided to use the GNW200 type burner, and the burner was appropriately improved. (1) The moving mode of the burner is changed from the track type forward and backward movement to the universal wheel, which can move forward and backward, left and right, which expands the range of motion and facilitates height adjustment. (2) The connection method of the stove mouth is changed from flange bolt connection to quick opening bolt connection. It can reduce the labor intensity of operators, reduce operating time, and improve production efficiency. (3) The cable laying method is changed from buried to overhead, which increases the space used on the ground, prevents electric shock accidents and prolongs the service life of cables. (4) Due to the harsh on-site environment, the blower motor and instrument parts are equipped with protective covers. The existing stove structure fully meets the use requirements of the burner, and only the square stove mouth needs to be changed to a round shape. 3 The application effect of the burner In the actual operation of the biomass burner, by strengthening the operation control, timely adjusting the combustion parameters and summing up experience, the equipment runs smoothly and has achieved good results. (1) Shorten the cooking time. The pot is kept at 22-25 hours, which is 2 to 3 hours shorter than before. (2) Extend the service life of the solid caustic soda pot and reduce the production cost. The average cooking times of the solid caustic soda pot has been increased from 108 to 121 times, which extends the service life of the solid caustic soda pot. In 2010, the number of leaky pots was reduced by 5, which alone can save about 500,000 yuan. (3) The degree of automation is improved, labor intensity is reduced, and work efficiency is improved. The burner burns according to the set parameters, without any adjustment in the intermediate process, the operator only needs to patrol on time to check for abnormalities. (4) Changed the on-site operating environment. The phenomenon of black smoke and gunfire is eliminated, and the image of coarse, black and dirty solid alkali production is changed. To If you are interested in gas oil burners, please contact us for a quote!