Biomass burner Biomass burner technology is an advanced technology for manufacturing energy-saving and environmentally friendly fuels.

To Biomass burner technology is an advanced technology for manufacturing energy-saving and environmentally friendly fuels, and biomass combustion is also a way to more easily obtain crop waste, which is of great significance to agricultural development, energy conservation and environmental protection. The biomass burner uses loose biomass waste instead of wood fuel to produce energy-saving biomass briquette, which to a large extent prevents deforestation in rural areas, perfectly protects the forest, and reduces the use of wood fuel. combustion. Secondly, the biomass burner can be produced without using any binder, which can be regarded as a perfect way of waste fuel. In addition, the biomass burner does not generate noise and fly ash in the process of manufacturing energy-saving biomass briquette, so it is much more environmentally friendly than traditional production methods. To After a period of use, the biomass burner will cause slagging. This is a fairly common phenomenon in biomass burners, mainly because the softened or melted ash particles are not cooled sufficiently, and they encounter lower temperature changes. It can be seen that the formation process of slagging in the biomass burner can be pided into three stages. In the first stage, when the fuel is burned in the biomass burner, as the furnace temperature increases, When the softening temperature of the ash is reached locally, the ash particles will soften, so that the sodium, calcium, potassium and a small amount of sulfate in the ash will form a sticky surface. To With the further increase of the temperature in the fuel layer in the biomass burner, the temperature in the oxidation layer and the reduction layer exceeds the softening temperature of the ash, especially in the reduction layer, the Fe3+ in the fuel is reduced to Fe2+, the ash particles Most of the reducing layer softens and adsorbs each other, forming a large eutectic. To The large eutectic in the biomass burner will fall, and will quickly cool down when it encounters the heat exchange surface during the fall, so as to directly form a solid adhere to the heat exchange surface, forming the so-called slagging. Since there are many factors that affect the slagging of biomass burners, they are not only related to slagging characteristics such as ash melting point, ash composition, and ash viscosity, but also to the thermal parameters of the furnace, the structure and layout of the burner, the aerodynamic working conditions in the furnace, and the boiler Operating parameters are closely related, so all aspects cannot be ignored. To To To In order to avoid slagging in the biomass burner, the first thing to do is to select biomass particles correctly, and try to use wood chips biomass combustion particles. Compared with other biomass fuels, sawdust biomass combustion particles have less slagging phenomenon after combustion, and can be burned fully, and the combustion value is also high. To To If you are interested in gas oil burners, please contact us for a quote!