Causes of biomass pellet burner jams and internal inspection of the machine

To The biomass pellet burner will have some abnormalities during use, which will affect its use effect. In order to avoid these abnormalities, a comprehensive internal inspection can be carried out. However, many users come into contact with biomass pellet burners for the first time, and they are not sure where the inspection work should start. To Biomass pellet burners often encounter material jams during use. There are three main reasons for this phenomenon. On the one hand, the quality of the biomass pellet fuel is problematic. Once the fuel used contains more impurities, it will easily occur. Problems such as material jam and coking. To On the other hand, there may be insufficient fuel in the biomass burner. When the fuel used by the equipment is burned out during the working process, material jam and coking will occur. On the other hand, it is related to the size of the air distribution. During the installation of the equipment, if the air distribution is too large or too small, the biomass burner will jam. To In order to reduce the occurrence of problems as much as possible, the internal inspection of the biomass burner should be done. The inspection should start from the combustion head of the biomass burner to confirm whether it is installed and adjusted properly; secondly, check the direction of motor rotation to see if it corresponds correctly . To In addition, what needs to be checked is the circuit connection outside the biomass burner to determine whether it meets the requirements. In addition, it is necessary to perform cold simulation of the biomass burner according to the line conditions to observe whether the various parts of the equipment are normal and whether the flame detection protection part is normal. To If you are interested in gas oil burners, please contact us for a quote!