Introduction to the main technical parameters of common stenter setting machine burners

We know that for different production standards, it is necessary to select a stenter setting machine burner equipment with compatible functions to complete the production work. Below we mainly introduce a tentering and heat setting suitable for woven, knitted and warp knitted fabrics of cotton fabrics, chemical fiber fabrics, blended fabrics and other interwoven fabrics with a weight of 50 to 800g/m per square meter. Stenter setting machine burner equipment. In order for everyone to better understand the equipment, let's introduce the main technical parameters of the machine. In the burner equipment of the stenter setting machine, the drying room used is single-layer horizontal hot air circulation, small drying room, and building block structure. The nominal speed reached during its operation is 100 meters per minute, and its speed range is 5 to 100 meters per minute. The cloth feed end is also equipped with a large digital liquid crystal display for easy viewing by the operator. In addition, the burner equipment of the stenter setting machine has a special place, that is, the driving mode it adopts is AC frequency conversion. China's low-temperature burners, including the main engine, overfeeding, brushes, circulating fans, overspeeding, and falling cloth, are all driven by frequency conversion. The overfeed range is -15% to 35%, and the resolution does not exceed 0.1%. During the operation of the burner equipment of the stenter setting machine, users can choose different drying room temperature heating methods, such as steam heating and electric heating, or heat transfer oil heating, or liquefied gas or natural gas heating. The installed capacity of the machine is 11KW multiplied by N plus 35KW. The narrow range is 700-(W-200); the wide range is 1000-(W-200). The above has introduced the main technical parameters of a relatively common and representative stenter setting machine burner equipment. I believe that after understanding these contents, everyone will have a more comprehensive understanding of the equipment. If you are interested in low temperature burners, please contact us for a quote!