Basic conditions for the safe and normal operation of the burner of the stenter setting machine

In general, if you want to keep the burner equipment of the stenter setting machine operating safely and normally, the following basic conditions should be met :, During use, the burner equipment of the stenter setting machine should be cleaned regularly. Especially with regard to the gears, chains, belt pulleys, etc. of the transmission part, if there is dust or socks in the inspection, it should be removed in time. The wear of each belt should be checked once a day, and the rail guide, sock plate seat, and even iron must be refueled once every shift. In addition, every gear reducer should do an oil change every six months. Second, the chains related to the burner equipment of the stenter setting machine should be inspected once a week, and the sock plate moves with two chains as tight as possible. It is better to loosen the other parts of the chain manually, and there is no jump. Third, during the operation of the burner equipment of the stenter setting machine, try to avoid pressing the stop button directly to ensure the normal operating speed of the machine. If you need to change the material, you can reduce the speed of the vehicle, or increase the number of personnel, and you must not stop at will. Fourth, if you accidentally cause an abnormality in the burner equipment of the stenter setting machine, you should learn more about the specific operating conditions before the equipment fails to increase the repair speed and reduce the parking time to ensure the operation rate. Fifth, the working efficiency of the burner equipment of the stenter setting machine has a lot to do with the operating skills of the operators. Generally speaking, reducing the number of times the sock falls can greatly improve the operating rate of the burner of the stenter setting machine. ! If you are interested in low temperature burners, please contact us for a quote!