The built-in parameters of the biomass pellet burner cannot be changed arbitrarily

To To To Biomass pellet burner refers to the use of straw and other agricultural and forestry waste particles as fuel, adopts a semi-gasification combustion method, effectively avoids the problem of slagging of straw particles in the direct combustion process, and uses precise control of air distribution and intake Material, gasification and combustion are realized in an integrated machine to achieve efficient and clean combustion. The pellet burner directly outputs high-temperature flame and flue gas, and can be directly connected to energy-consuming equipment such as boilers and industrial kilns. The market is wide To To To The built-in parameters cannot be changed arbitrarily, otherwise an abnormal situation will occur. If the built-in parameters need to be changed, contact the biomass burner manufacturer. After using the fire detection hole and the material detection hole, the operation must be strictly in accordance with the regulations. If the illegal operation is performed, it is very easy to cause accidents, such as fire. Therefore, it is necessary to equip corresponding fire prevention facilities in the working environment of the burner to ensure safe use. The diameter of the fuel used is controlled within 6~10mm. Moreover, do not add dyes with more impurities or larger particles. You need to pay attention when adding materials. Do not add iron and other substances into the tank, otherwise it will cause a biomass burner. damage. To To To Sawdust pellets or straw pellets biomass fuel; boiling semi-gasification combustion and tangential swirling air distribution design, which makes the fuel and combustion complete; the equipment runs under low pressure without backfire and de-fire phenomenon. Wide heat load adjustment range : The heat load of the burner can be adjusted quickly within the range of 30%-120% of the rated load, and the starting block is sensitive; pollution-free and environmental protection benefits are obvious: the renewable biomass energy is used as fuel to realize the sustainable use of energy. Low-temperature segmented combustion technology, low emission of nitrogen oxides, sulfur dioxide, and dust in the flue gas, is the best substitute for coal stoves; To To To No tar, waste water and other waste discharge: using high-temperature gas direct combustion technology, tar is directly burned in gaseous form, solving the technical problem of high tar content in biomass gasification, and avoiding the secondary water quality caused by washing tar Pollution; simple operation and convenient maintenance: automatic feeding, wind ash removal, simple operation, small workload, only one person on duty; low investment, low operating cost: reasonable design of biomass combustion structure, when used in various boilers The transformation cost is low. To To To The built-in parameters cannot be changed arbitrarily, otherwise an abnormal situation will occur. If the built-in parameters need to be changed, contact the biomass burner manufacturer. After using the fire detection hole and the material detection hole, the operation must be strictly in accordance with the regulations. If the illegal operation is performed, it is very easy to cause accidents, such as fire. Therefore, it is necessary to equip corresponding fire prevention facilities in the working environment of the burner to ensure safe use. The diameter of the fuel used is controlled within 6~10mm. Moreover, do not add dyes with more impurities or larger particles. You need to pay attention when adding materials. Do not add iron and other substances into the tank, otherwise it will cause a biomass burner. damage. To To To To To To If you are interested in gas oil burners, please contact us for a quote!