The stenter setting machine burner is made in China

Low temperature burner Before operating the burner of the stenter setting machine, we must be proficient in the corresponding regulations and requirements, and Follow the requirements. So, what exactly does the equipment's job responsibilities include? First of all, during our daily work, we must keep the equipment clean, and ensure that the working environment is clean and dry, and there must be no piles of debris. Secondly, it is necessary to insist that each stenter setting machine burner equipment is assigned to a dedicated staff for management and use, and other personnel are not allowed to operate without authorization. Before turning on the burner of the stenter setting machine, you should first check whether there are clothes hanging in the drying room, and deal with it in time. In addition, it should also check whether the safety and fire prevention facilities are in place. If there is anything wrong, it should be reported to the relevant department in time, and then drive the car after handling. Third, in the process of daily operation, you should pay close attention to the operating status of the burner equipment of the stenter setting machine, and frequently remove the 'flying' and fluff in the drying room to prevent fire. During the operation of the equipment, the display of each monitoring instrument should be observed. If a safety valve is found to be leaking, it should be notified immediately for handling without delay. Fourth, the maintenance and maintenance of the burner of the stenter setting machine should also be done in accordance with the requirements. For example, when performing lubrication care, you should be cautious, and the mouth of the oil pot should not face the direction of movement of the machine, and keep it with the machine. For a certain distance, the cover should be covered after refueling. Note that maintenance and maintenance operations can only be carried out when the equipment is stopped and the main power supply is cut off. Later, when the work of the burner equipment of the stenter setting machine is completed, the equipment should be shut down in time and the main power supply should be cut off. Then wait until the oven temperature drops to room temperature before the staff can leave the scene. And pay attention to timely clean up the working environment on site. If you are interested in low temperature burners, please contact us for a quote!