What is the solution to the blocking and blocking phenomenon of the burner?

To If the burner appears to block or jam, use a wooden stick to poke it (usually caused by too long particles). Never use iron wire or steel bars to prevent the screw from being caught in the screw and causing damage to the screw; the fuel burns In order to ensure the safety and normal operation of the biomass burner, it is necessary to operate according to the following operating methods: 1. Before the burner starts, clean the carbon deposits in the furnace bridge, clean the carbon deposits in the furnace bottom, add pellet fuel, and close the bin lid , Open the isolation valve; 2. Turn on the power of the equipment to be used, check whether the circuit and water pipe are normal, and check whether the cooling pool has enough water. The solution to the material jam phenomenon Open the burner cooling water inlet and outlet valve, the burner appears to block the material and confirm that the interlayer cooling water of the high temperature combustion chamber is filled; 3. Adjust the air supply gear to a lower level, and put in an appropriate amount of base material and oil. (Such as diesel) and heavy oil burners (such as waste engine oil) are officially ignited and started, lightly open the furnace door to supply air, close the furnace door, start the feeding system, and gradually adjust the air supply gear to the right amount. The feeding speed and air volume should be gradually increased, and it is not advisable to accelerate too fast, so that the furnace temperature can rise normally. To The main application fuel types of the combustor: Fuel oil: light oil (only including diesel and kerosene), heavy oil, residual oil, etc. Solid fuels: biomass pellets, sawdust, wood flour, etc. Gas: natural gas, artificial gas, liquefied petroleum gas, gas (coalbed methane), biogas, methanol and other six categories. Among them, the composition and calorific value of artificial gas, such as city gas, methane gas and biogas, are quite different due to raw materials and generation methods. To If you are interested in gas oil burners, please contact us for a quote!