How should we start the burner correctly?

To To To How should we start the burner correctly? 1. For the new furnace body, carefully check whether the gas meets the requirements of the burner before commissioning; check whether the detection instrument on the gas supply pipeline is normal, whether the pipeline valve is open or closed, and whether it is convenient for future use and maintenance. 2. For the pipeline of the new device, the reliability of the pipeline and the tightness of the pipeline should be carefully checked. 3. Users who use a separate gasification station should ensure that the gas supply and gas supply parameters meet the requirements for safe combustion. 4. When the burner receives a signal that is not conducive to incineration (for example, incineration failure, unstable air pressure, and circuit problems), the combustion controller immediately turns off the gas and sends an alarm. 5. If the burner alarms, the operator will reset it manually after dealing with the fault to continue the operation. 6. For the operation of the entire equipment, the operator should refer to the furnace safety operating procedures and production process requirements. 7. When it is necessary to adjust the control temperature according to the requirements of the production process, the operator should refer to the manual of the intelligent numerical control instrument for adjustment. 8. The operator carefully reads the equipment manual and masters common sense and safe operation methods. 9. Check the gas valve before opening the burner. Otherwise, the burner will not work. 10. Activate the power control button on the control cabinet. At this time, the digital display shows the current temperature in the furnace. The temperature of the new furnace is the ambient temperature. 11. Activate the fan control button and the fan installed on the stove will work. At this time, if the fan damages the control cabinet, the automatic maintenance will not proceed to the next step. 12. When there is no abnormal operation of the combustion fan, start the combustion control button again. At this time, the combustion program controller starts to work. After the procedure, incineration, gas supply, flame detection, etc., complete safe combustion. To If you are interested in gas oil burners, please contact us for a quote!