What is the supporting device of the burner?

The use of the burner depends on the specific type of combustion gas. The burner device is different, that is, the use is different, but one thing is that the standard type is still the same: Explosive tube: The container burst tube fusion seals two platinum wires, tight upper end, induction coil Mutual connection, through the outer end of the platinum wire end of the induction coil, sparks generated between the platinum wire, causing flammable and explosive gas to burn. For safety reasons, the explosive combustion tube and tube platinum wire are often coated with copper mesh on the explosive tube wall.　　Platinum wire combustion tube: On the upper part of the spiral of the combustion tube and the platinum wire, the extended, alternating platinum wire tube joint is used for heating. When the current passes through the platinum wire, it becomes a red hot filament, and the gas is on its burning surface.　　Pipe and rooster comb: comb-shaped tube, the amount of trachea is used to connect the absorption bottle of each combustion tube. The cock is used to control the flow of gas through the pipeline. There are generally two kinds of roosters, roosters and T-shirts. Copper oxide combustion tube: a combustion is carried out in a quartz tube, where the thicker capillary tube of the tube, the other end of the glass tube, the middle part of the end with a slightly smaller diameter is oxidized than the easy-to-load particles Copper is large. In order to burn evenly with the copper oxide tube, it can be installed in a part of the combustion tube furnace and pided into two parts, a thermocouple or thermometer in the upper half of the branch tube inserted to control the combustion temperature. To If you are interested in gas oil burners, please contact us for a quote!