How to solve the problem of exhaust gas purification treatment of the burner of the stenter setting machine?

Under normal circumstances, during the use of the stenter setting machine burner, it will produce a large amount of exhaust gas, which not only contains relatively High temperature, and it also contains a lot of impurities, such as fiber, dust, residual volatiles of dyes and additives, etc., so it will have a more irritating and unpleasant taste. And when dealing with it, a single method alone cannot solve the problem. So, how can we solve this problem? First, we need to cool down. Generally speaking, the temperature of the exhaust gas emitted by the burner of the stenter setting machine is higher, up to 170℃, and the amount is relatively large. Therefore, it is often necessary to cool down before purifying treatment, which can not only ensure safety, but also improve the follow-up The treatment effect. When cooling down, we can use aluminum fin superconducting tube split heat exchanger to achieve the goal. In fact, before cooling down, we still need to carry out filtration treatment, generally using stainless steel circulating filter screen for treatment. In other words, the exhaust gas generated by the burner of the stenter setting machine needs to be filtered first, and then cooled. This is because the exhaust gas contains more fibers and large droplets of oil mist, and only after it has been filtered can it reduce its impact on the heat exchanger and ensure the cooling effect. Moreover, the circulating filter can be removed and cleaned for easy reuse. In the process of treatment, we also need to use a spray-type oil fume removal device for purification. When the exhaust gas generated by the burner of the stenter setting machine is perted and diffused, it can contact with the high-pressure water mist, and then it can be well It adheres to fibers, oil mist and other substances to separate them. After that, it needs to use activated carbon deodorizing device for further processing. Sometimes, under the influence of dyes and additives, the exhaust gas generated by the burner of the stenter setting machine will still emit a very unpleasant smell after the above treatment, so at this time, it is necessary to use an activated carbon deodorizing device to remove Peculiar smell, so as not to affect the lives of nearby residents. If you are interested in low temperature burners, please contact us for a quote!