The purpose and main components of the burner of the stenter setting machine

In textile processing, the final quality of the product is generally stricter. And after many processes, some minor problems such as deformation are likely to occur. In this case, it is necessary to perform post-integration of textiles, including tentering finishing and setting finishing, so at this time, stenter setting machine burner equipment is required. Combined with the analysis of the work and application of the burner equipment of the stenter setting machine, the main purpose of using this equipment is to improve the feel, slippage, color, width, strength and appearance of the fabric through the stenter setting effect. Moreover, for some textile fabrics of non-pure cotton products, through the treatment of this equipment, the effect of stable size can also be achieved. During the operation of the equipment, the main purpose is to immerse the cloth with chemical materials in the trough, and then enter the oven after being evenly squeezed by the rollers. When the cloth passes through the oven, it will be dried and shaped under the action of high temperature and hot air. The shaped cloth has a good hand feeling and stable size. Gas low-temperature burner So, what is the basic composition of the burner equipment of this stenter setting machine? In fact, the equipment mainly includes five parts, which are the feeding part, the weft trimmer, the chain, the oven body and the doffing and rolling cloth device. In addition, there are chemical feed system and oil furnace heating system. The structural design of the feeding part is relatively simple. It is mainly composed of a trough and a roller. The cloth enters the trough with chemical materials, and then the excess chemical materials are squeezed clean by the rollers. In this process, the staff need to pay attention to one thing, that is, to keep the pressure on the left and right sides of the burner equipment of the stenter setting machine consistent. Otherwise, there will be more material on the side with low pressure, and less material on the side with high pressure, and the cloth will have quality problems such as inconsistency between left and right. In the burner equipment of the stenter setting machine, the weft trimmer is also an important component. At present, four sets of sensors are often configured on a weft trimmer at the same time. Each set of sensors includes two parts: light-emitting and light-sensitive. The weft can be produced by photoelectric effect, and the action part is driven by a hydraulic system. ! If you are interested in low temperature burners, please contact us for a quote!